Trimming is an important step in the whole growth and development cycle of any plant. Regular trimming of the dead leaves should be done to get a stronger, healthier and high quality of produce. The dead leaves that stick onto the plants will only damage the good leaves, thereby damaging the plants as a whole.
The 18″ Standard Stand Leaf Trimmer is one of the trimmers available from a varied option in the garden market. The 18″ Standard Stand Leaf Trimmers are suitable for commercial projects too where there are so much to trim and should be done in a limited time. In this article we will discuss about the features of the 18″ Standard Stand Leaf Trimmer.
Features of the 18″ Standard Stand Leaf Trimmer
Performance – When compared to the old traditional way of cutting through scissors, the performance delivered by the 18″ Standard Stand Leaf Trimmer is way too high. It also provides for minute trimming which is otherwise impossible through the other methods.
Extra Sharp Blade – Ultra Sharp blades are used in the 18″ Standard Stand Leaf Trimmer for trimming the dead leaves of the plants. This provides for sharp and clean cuts and does not disturb the environment in which the good leaves and the plants are growing up. The leaves cut too much also have negative effects on the developing plants. The sharp blades of the 18″ Standard Stand Leaf Trimmer makes sure that only the damaged leaves are trimmed and only up to a certain level.
Built-in fan – The 18″ Standard Stand Leaf Trimmer is also equipped with a built-in fan which performs the function of cleaning up the surrounding of trimming. It also assists in transporting the waste and trimmed leaves and disposing it in the catch bag thereby keeping the surroundings clean.
Catch Bag – There is a catch bag attached to the bottom of the 18″ Standard Stand Leaf Trimmer. This catch bag collects the trimmed products, that is, the dead leaves and unwanted twigs if any. Once the bag is full; you can easily dispose the waste into the garbage.
Usage – The usage and utility of the 18″ Standard Stand Leaf Trimmer is wide. It is not only used to trim the leaves of ordinary plants but it is also used for aromatherapy products and large potpourris.
Time and Energy – The time and energy taken for trimming by the 18″ Standard Stand Leaf Trimmer is much lesser when compared to the traditional way. It finishes off the work very quickly and efficiently.
Maintenance – Using 18″ Standard Stand Leaf Trimmer helps in maintaining a clean environment within the hydroponic grow boxes or tents or rooms. The leaves are collected as and when it is trimmed inside this Standard Stand Leaf Trimmer. The usual problem of trimmed dead leaves piling up is avoided here.
To order for the 18″ Standard Stand Leaf Trimmer for trimming the leaves of your plants grown inside the hydroponic grow box, click on the following link: