LTL 10 burner natural gas CO2 generator- High Altitude works in higher altitude areas. This CO2 generator works using natural gas. The burner is made of brass and is 10 in number. It has the facility to use 2, 6, or all 10 of the burners. LTL 10 burner natural gas CO2 generator can produce 5534-27,670 ppm of CO2 in an area. The amount of CO2 from this burner is 6-27 cubic ft per hour. It works smooth in a power of 24 V DC.
LTL 10 burner natural gas CO2 generator-high altitude uses natural gas and needs installation near to the pipeline. The incoming gas pressure will be higher and the LTL 10 burner CO2 generator will need a regulator to control the gas pressure. This regulator comes with the package of this LTL CO2 generator. The ideal gas pressure is somewhere between ¼ – 5 PSI. This high altitude LTL 10 burner CO2 generator works well at a height of 5000 ft and above.
LTL 10 burner natural gas CO2 generator installation
The LTL 10 burner natural gas CO2 generator is hung installed. It is not kept on any object. It is supported from above with a ceiling joist. It is kept at a distance of 20 inches away from any other objects. A 20 inch chain, enough screw hooks are provided with the burner set.
The LTL 10 burner natural gas CO2 generator-high altitude comes fully assembled and only need its installation at the required position. There is an in-built safety switch that turns the power off in case of any fall. A spark is produced from the pair of electrodes, near to the tip of the burners to light it up. The electronic ignition eliminates the pilot flame to ignite the burners, and serves as an additional safety part of this LTL 10 burner natural gas CO2 generator.
Safety measures while using LTL 10 burner natural gas CO2 generator- High Altitude
The flame from the LTL 10 burner natural gas CO2 generator should be blue to assume it to be in good condition. If there is any color difference, then there is something wrong in its working and needs a closer look. Since the spark is located near the tip of the burner it should always be kept clean. The LED indicators show the main power on, lock out error and pilot valve on.
The amount of generated CO2 from the LTL 10 burner natural gas CO2 generator is also a reason for concern. The amount of CO2 should be optimal as increased amount can kill the plants. The room must be well aerated with frequent flow of air.
Do not perform the installation on your own; seek a professional help from an agency or gas supplier. Do not use any mobile phones around the LTL 10 burner natural gas CO2 generator- high altitude.
In case of any gas leakage, switch off the LTL 10 burner natural gas CO2 generator and open the doors and windows to ventilate the area.