LTL 10 Burner Natural Gas CO2 Generator – Low Altitude

CO2 Generators are useful to either supply or control CO2 levels into hydroponics systems. Using CO2 generators is getting common these days and so in the market you will find various related products. LTL controls offer various types of CO2 Generators ranging from 4 burner, 8 burner or 10 burners.


Additionally, LTL Controls produces 2 distinct types of 10 Burner CO2 Generators, one type uses Propane and the other one uses Natural Gas to operate. Here the details of LTL 10 Burner Natural Gas CO2 Generator – Low Altitude is narrated below.

Features of LTL 10 Burner Natural Gas CO2 Generator – Low Altitude

1. Types Of Generator – There are two types of LTL 10 Burner Natural Gas CO2 Generator, one that operates at High Altitude (above 5,000 ft) and other is Low Altitude model (below 5,000 ft).
2. Fuel – LTL 10 Burner Natural Gas CO2 Generator – Low Altitude utilizes Natural Gas as a fuel to perform its functioning.
3. Co2 Supply Capacity – 6 – 27 Cubic Feet of CO2 is supplied in an hour.
4. Regulator – LTL 10 Burner Natural Gas CO2 Generator – Low Altitude comes with the correct regulator. This regulator is used to minimize the pressure of natural gas supplied to the unit.
5. Hose – The 12’ hose is included with LTL 10 Burner Natural Gas CO2 Generator – Low Altitude for safe gas connection.
6. Brass Burners – The pre-installed and clean-burning brass burners are included in LTL 10 Burner Natural Gas CO2 Generator – Low Altitude.
7. Safety Tip-Over Switch – This feature makes the LTL 10 Burner Natural Gas CO2 Generator – Low Altitude unique. The pendulum like switch will automatically turn off the unit if it is not leveled or falls.
8. Safer Operations – An electronic ignition with dual redundant solenoid valves eliminates the open pilot flame and makes this generator twice as safe when compared to others on the market.
9. Variable Output – This unique feature included in LTL 10 Burner Natural Gas CO2 Generator – Low Altitude gives you the ability to activate and deactivate certain burners. This allows you to run the generator using 2 burners, 6 burners, or all 10 burners. This makes the generator extremely versatile and capable to work for various types of grow room sizes.

Additional Information about LTL 10 Burner Natural Gas CO2 Generator – Low Altitude

  • Air Flow- The 10 Burner CO2 generators should be placed at proper hanging level. It requires adequate amount of ventilation so you should maintain at least 20’ of space between the generator and any other object. Do not place it on the top of table or other furniture as it requires unlimited air flow through its bottom.
  • Hooks- The carefully included chains and hooks with LTL 10 Burner Natural Gas CO2 Generator – Low Altitude should be used for proper hanging. The correct location of the generator eliminates varieties of problems.
  • LED Indicators- There are 3 LED lights placed at the side of the generator, namely, main power on, lock out error and pilot valve on. Each light turns on indicating the task the unit is performing.