A grow light system is considered highly capable and is a part of successful indoor gardening when it has higher intensity and better light reflection facilities. In that case PIPELINE – 8″ reflector with internal cool tube is definitely one those capable light systems that does the dual function of providing higher intensity light and reflect the same where it is needed. The 8” reflector with internal cool tube has larger cool tube and large enough flanges at both the sides for an 8” duct tube to fit to. Together with this air cool tube and the reflector PIPELINE – 8″ reflector with internal cool tube can score higher.
Characteristics of PIPELINE – 8″ Reflector with Internal Cool Tube
All the four sides of this reflector part have reflective surfaces. The grow light is practically lying deep inside the reflective hood so that no amount of light rays escapes the reflective surfaces and fails to redirect.
The cool tube in the PIPELINE – 8″ reflector with internal cool tube is large in size to allow maximum air flow through them to keep the heat away all the time. The cool tube will be less heated and the reflective surfaces are also kept cool to do their job.
In this PIPELINE – 8″ reflector with internal cool tube the light socket is already installed and can fit in both HPS and metal halide bulbs that are of any wattage. The larger cool tube can fit for any big sized metal halides.
The PIPELINE – 8″ reflector with internal cool tube comes fully assembled and ready to use. The necessary electrical cord of about 15’ is given so that the system may be installed at any fa away distance.
The PIPELINE – 8″ reflector with internal cool tube can accommodate the bigger duct tube diameter which is usually used when there are two or more lighting systems. More lighting systems ultimately join somewhere and exit the same way. Since the warm air from two sources is coming to the duct tube, its diameter is bigger. So the 8″ reflector with internal cool tube can be used as one of the many lighting systems used in a bigger growing area.
The Pyrex cool tube is cent percent air tight and once installed and sealed does not let air to leak through.
For hanging the 8″ reflector with internal cool tube, 2 hanging clips are also provided for easier installation.
The whole system of this PIPELINE – 8″ reflector with internal cool tube weighs about 18 pounds and the dimensions are 22” long, 20” wide, and 9” deep of high. The extensions at the sides for the duct tubes are 8” wide.
The better cooling tube of the PIPELINE – 8″ reflector with internal cool tube keeps the surrounding temperature under control and does not cause any sudden fluctuation. This makes it possible to keep the lighting system closer to the plants and avoid any burning mishaps. The reflective surface increase the light intensity to help increase the penetration, facilitating better, and healthier plant growth.